Volcano Watch: What’s going on at Kilauea’s summit lava lake?

This thermal image from the Feb. 1 helicopter overflight shows features of the lava lake in Halema‘uma‘u, at the summit of Kilauea. The eastern portion of the lake is solidified at the surface, with active surface lava mostly limited to the western side. Nevertheless, small ooze-outs of lava occasionally appear along the eastern lake perimeter. The western lake is perched several meters above its base, impounded by a levee of solidified lava. Lava erupts at the western fissure and enters the lake at a small inlet. A large overflow breached the northern levee and flowed along the northern lake margin towards the east. The temperature scale is in degrees Celsius. (USGS image by M. Patrick)
Subscribe Now Choose a package that suits your preferences.
Start Free Account Get access to 7 premium stories every month for FREE!
Already a Subscriber? Current print subscriber? Activate your complimentary Digital account.

Kilauea’s current lava lake formed on Dec. 20th and rose rapidly within Halema‘uma‘u crater during the dynamic first week of the ongoing summit eruption. Near the end of December, the eruption stabilized and the lava lake has been slowly changing since then.

The vent on the north wall of Halema‘uma‘u shutdown about one week into the eruption and a narrow ledge of lava began to solidify around the perimeter of the lava lake. As the days went by, it became clear that a “perched” lava lake was beginning to form.

Lava lakes become perched as crust that solidifies around the lake perimeter, along with the accumulation of surface crust at the lake margin, is frequently resurfaced by small lava overflows. These overflows build up a levee that surrounds the lava lake. As the lake level rises, overflows continue to resurface and heighten the levee. Perched lava lakes have been common at Kilauea over the past 200 years.

A “permanent” crust began forming on the eastern surface of the lava lake in mid-January. The large island that had spent the previous month drifting about the lava lake became locked in place with a dozen or so smaller islands, trapped by the cooling crust. In an odd twist, the solidified crust contains bubbles and is more buoyant than the molten lava, which continues to degas and become increasingly heavier.

As lava continued to erupt from the west vent, the active western portion of the lava lake built up perched levees above the stagnant eastern surface crust. The active lava lake remains perched above its base by several meters or yards.

The crust on the eastern portion of the lava lake has remained solidified for about a month now, but it continues to rise within the crater. How is this possible? The main mechanism driving the rise of the crust is active lava from the perched lake seeping down underneath the solidified crust to force it upward.

As the eastern crust rises, lava squeezes up in areas between the solidified crust and the crater walls, forming small ooze-outs around the perimeter of the lake. These ooze-outs are evidence that this “apparently solid” ground is a thin crust lying on top of molten lava.

The rise of the lava lake has been interrupted by several plateaus, and even drops, in level over the past few weeks. These have been recorded by a USGS Hawaiian Volcano Observatory continuous laser rangefinder — which records the level of a fixed area of the active lava lake surface. How is a drop in lava lake level possible while the vent continues to erupt lava into the lake?

There are several factors that can contribute to the leveling off, or even decrease, in the lava lake level. First, the lava level mirrors the summit tilt closely. As the summit magma reservoir decreases in pressure (deflation) there is typically a lower effusion rate — or less lava entering the lava lake. When the supply rate is down, ongoing processes that cause the active lava surface to drop become more apparent.

Smaller short-term drops in lava level could be due, in part, to minor collapses of the perched levee walls allowing some of the lava to drain down into an area of lower elevation. Another process mentioned earlier, is lava seeping below the eastern, solidified crust to promote uplift of the stagnant lava surface.

Volcanic gases also play a large role in these processes. Most gas is released when the gas-rich lava is first erupted in Halema‘uma‘u, though some remains in the lava as bubbles. Over time, some of those bubbles slowly escape from the lava lake, and the lake level may drop in response — like foam being compressed.

Despite occasional drops in the lava lake level, the overall trend of the lava level is rising. Most recent lava level measurements were about 217 m (712 ft) on Feb. 18. This level is still approximately 45 m (148 ft) below where the lava is expected to be visible from Kilauea Overlook within Hawaii Volcanoes National Park. Similar lava lake behaviors were also reported at Kilauea during the 1800s and 1900s. As HVO scientists continue to closely monitor Kilauea’s ongoing summit eruption with modern equipment, we learn more about how these processes work and develop a better understanding of past and potential future eruptions.

Volcano activity updates

Kilauea Volcano is erupting. Its USGS Volcano Alert level is at WATCH (https://www.usgs.gov/natural-hazards/volcano-hazards/about-alert-levels). Kilauea updates are issued daily.

Lava activity is confined to Halema‘uma‘u with lava erupting from a vent on the northwest side of the crater. As of the morning of February 17, the lava in the western, active potion of the lake in Halema‘uma‘u was about 215 m (705 ft) deep, with the eastern portion of the lava lake solidified at the surface. Summit tiltmeters show neither inflation or deflation over the past day. Sulfur dioxide emission rate measurements made on February 16 were about 1,200 t/d, below the range of emission rates from the pre-2018 lava lake. Seismicity remains elevated but stable, with elevated tremor and a few minor earthquakes. For the most current information on the eruption, see https://www.usgs.gov/volcanoes/Kilauea/current-eruption.

Mauna Loa is not erupting and remains at Volcano Alert Level ADVISORY. This alert level does not mean that an eruption is imminent or that progression to eruption from current level of unrest is certain. Mauna Loa updates are issued weekly.

This past week, about 209 small-magnitude earthquakes were recorded beneath the upper-elevations of Mauna Loa; most of these occurred at depths of less than 6 kilometers (about 4 miles). Global Positioning System measurements show continued slow summit inflation, consistent with magma supply to the volcano’s shallow storage system. A slight increase in the rate of inflation at the summit, that began in January, is continuing. Gas concentrations and fumarole temperatures at both the summit and at Sulphur Cone on the Southwest Rift Zone remain stable. Webcams show no changes to the landscape. For more information on current monitoring of Mauna Loa Volcano, see: https://www.usgs.gov/volcanoes/mauna-loa/monitoring.

There was 1 event with 3 or more felt reports in the Hawaiian Islands during the past week: a M3.1 earthquake 3 km (1 mi) S of Pahala at 32 km (19 mi) depth on Feb. 13 at 1:28 p.m. HST.

HVO continues to closely monitor both Kilauea’s ongoing eruption and Mauna Loa for any signs of increased activity.

Please visit HVO’s website for past Volcano Watch articles, Kilauea and Mauna Loa updates, volcano photos, maps, recent earthquake info, and more. Email questions to askHVO@usgs.gov.

Volcano Watch is a weekly article and activity update written by U.S. Geological Survey Hawaiian Volcano Observatory scientists and affiliates.