Associated Press
OTTAWA, Ontario — Passengers screamed “Stop! Stop!” seconds before their bus crashed through a crossing barrier and into a commuter train during morning rush hour in Canada’s capital on Wednesday, killing six people and injuring 34.
“He smoked the train,” witness Mark Cogan said of the bus driver, who was among those killed. “He went through the guard rail and just hammered the train, and then it was just mayhem.”
It was not immediately clear what caused the bus to smash through the lowered barrier at a crossing in suburban Ottawa.
The front of the double-decker bus was ripped away by the impact, and the train’s locomotive and one passenger car derailed, though there were no reports of major injuries to train passengers or crew.
Eight were still listed in critical condition late Wednesday. The crash brought trains on the national Via Rail’s Ottawa-Toronto route to a standstill.
It was Canada’s second major rail accident in less than three months. A runaway oil train derailed and exploded in a Quebec town on July 6, killing 47 people in the country’s worst rail disaster in more than a century.
Tanner Trepanier said he and other passengers could see the four-car train bearing down on them as the bus approached the crossing.
“People started screaming, ‘Stop! Stop!’ because they could see the train coming down the track,” Trepanier said.
But the driver didn’t slow down, said Rebecca Guilbeault, who was on the bus with her 1-year-old son.
“I don’t know if the bus driver blacked out,” she said. “I’ve seen a few people dead, someone ripped in half.”
Another passenger, Gregory Mech, said the train crossing has about a 90-degree bend and he didn’t think the driver saw that the signals were flashing and the barrier was down.
“The bus actually hit the train dead on,” Mech told the Canadian Broadcasting Corp. “I could see that there were bodies on the train tracks. It was horrible.”
Passenger Romi Gupta, a 40-year-old office worker headed to her job in downtown Ottawa, boarded what she called the “overfull” bus at its last stop before the crash.
“The driver was OK. I got in a minute before and I said hello to him and he was fine,” said Gupta.
Moments later, she looked out the window and saw the train headed straight for the bus.
“The bus was too fast, he could not put the brakes on,” she said. “It was crazy. People were flying. I saw limbs.”
Transit union president Craig Watson confirmed the driver was killed. He did not identify the driver but said he was in his early 40s and had been with the bus company for about 10 years.
“It is a tragic morning in the nation’s capital,” Canadian Prime Minister Stephen Harper said in a statement.
The bus was on a dedicated transit line that runs parallel to a busy commuter artery just outside the suburban train station of Fallowfield. The Transportation Safety Board said the train was traveling at a reduced speed because it was nearing a station and because of the crossing.
Via Rail crossings have long been a concern, according to the national Transportation Safety Board’s lead investigator, Glen Pilon, who said retrieving the black box recording was a priority to determine what went wrong.
“Our team will take the time required to determine what happened. This could take several months,” said Jean Laporte, the Transit Safety Board’s chief operating officer.
Canada has seen 257 accidents involving passenger trains colliding with vehicles at level crossings over the last decade, the safety board said Wednesday.
Trains striking cars or trucks at rail crossings occur “with unfortunate frequency,” said Grady Cothen, a former senior safety official with the U.S. Federal Railroad Administration.
Driver distraction or fatigue and poorly designed intersections all can be factors, he said.
In the U.S., buses are required to stop before proceeding through a railroad crossing, even if crossing gates are up and there is no signal indicating a train is coming, Cothen said.
